Back Wall Module 1

The front and back walls of this shed measure 11' 9", but because they fit between the side walls, their actual length is 11' 2". The front and back walls must be symmetric, with a stud and a siding seam underneath the peak of the roof. The jig (gray plywood backing) has been modified with a 2" x 4" as a block on the left so that a stud falls at the center (of the wall, not the module) at 5' 7".

The 12' back wall is constructed in two modules, an 8' module and a 4' module. I decided not to use two 6'-wide modules. Although 6'-wide modules are easier to handle than 8' modules, modules of 8' & 4' make more efficient use of the materials.

The 8'-wide module hangs off the edge of the jig.